FEELME AI

Limited Time: 50% OFF Annual Plan

Keon Manual

Introduction

The Keon by Kiiroo is a premium interactive device designed to enhance your intimate experiences. This manual will guide you through setting up and using your Keon device.

The Keon is compatible with Feel Strokers and can be controlled via the FeelConnect app or synchronized with interactive content through FeelMe AI.

Keon Device

1. Set up your device

Using the micro USB cable provided, charge your device until the LED lights on the side panels start to blink green; about 4 hours.

We recommend charging the device fully prior to the first use. The charging port can be found behind the Keon.

While your device is charging

  • Scan the QR code on the insert found in the box, or go to www.kiiroo.com to create your user account.
  • Once you have created an account, register your device and activate your one (1) year warranty.
  • Download the FeelConnect 3.0 App so you are ready to pair your Keon with your mobile phone once it is charged.

Charging port location

2. Using your device

Insert the Feel Stroker into Keon, using the bottom side. Using your other hand, grab the Feel Stroker from the top and turn it counterclockwise until you hear a click. The Feel Stroker is now locked in place.

Turn the entire device around and lube the Feel Stroker and yourself.

Note: The Keon by Kiiroo was designed to be used with Feel Strokers only. The usage of any third-party hardware product in combination with the Keon violates the terms of usage and warranty, and Kiiroo will not be held liable for any damage sustained.

Insert and lock the Feel Stroker

3. Quick start

To turn on Keon, press the bottom button (the bigger one of the two) "power button" (approximately 4 seconds) until the device comes on.

Your Keon is now in Interactive Mode.

Long press the small (top) button for 2 seconds to reach manual mode.

To turn off Keon, press the bottom button (the bigger one of the two) "power button" (approximately 4 seconds) until the device turns off.

The flashing blue light indicates your device is in Interactive Mode and searching to connect to the FeelConnect app via Bluetooth.

Power and mode buttons

4. FeelConnect app & service

Please download the FeelConnect 3.0 app and follow the instructions in the app to pair your Keon to the app.

Please note: Keon is compatible only with FeelConnect 3.0

With FeelConnect you can:

  • Feel your lover - When paired online, the complementary devices give you the touch and intimacy you crave, from anywhere in the world.
  • Feel videos - Our exclusive encoded porn videos will make you feel and see your favorite models making the moves that turn you on most.
  • Feel webcam models - Our webcam partners have a special interactive section on their website with performers ready to control your device.

Visit FeelMe.com for top-quality interactive content recommendations for your new device.

FeelConnect 3.0 App

5. Connect with FeelMe AI

FeelMe AI is the world's first platform that uses AI to make adult content on the internet interact with your Kiiroo device in real-time.

Visit FeelMe.com on your Google Chrome Browser to start your free trial and find out more about the subscription package that suits your needs.

Available on desktop and mobile.

FeelMe AI Platform

6. Modes

Interactive mode - indicated by a blue light on both sides of Keon

To pair your Keon with content, follow the instructions on the FeelConnect app.

You will be able to enjoy interactive content, connect to your partner and even control your Keon manually from the app.

Interactive Mode

Manual mode - indicated by a white light

Push the "mode button" for approximately 2 seconds until the LED lights go white.

Push the upper and lower button on the left side of your Keon to control the length of the stroke.

Push the + button on the right side to increase the speed and push the - button to decrease the speed.

To pause

Click the power button once to pause The Keon. The LEDs will blink purple.

To resume

Click the power button and the LEDs will turn white again. Keon will resume moving.

Manual Mode Controls

7. Charging and LED indicator

Insert the USB cable into your Keon's charging port. The charging port is located at the back side of your Keon.

Insert the other end into a USB port. This can be in a computer or wall adapter.

Please note: wall adapter is NOT included in the box.

We recommend using a wall adapter as using a computer will exceed the 4 hour charging time.

Wait for the red LED light to blink slowly; this indicates that the Keon is charging.

The LED light will flash green when your Keon is fully charged. Please disconnect the charger before using.

When the battery is low, the LED indicator will flash red every 5 seconds.

When the LED indicator flashes red quickly, you will have approximately 5 minutes before your Keon disconnects from Bluetooth and turns off.

Charging indicators

8. Handling and Maintenance

Use

We recommend that you use Kiiroo Lube or any other kind of water-based lubricant only.

Do not use

Silicone lubricant as it could deteriorate the skin-like sleeve material. Massage oil or hand cream as lubricants.

Cleaning the Feel Stroker

Always clean your sleeve thoroughly after each use.

  1. Remove the Feel Stroker from the Keon.
  2. Remove the sleeve from the outer casing of the Feel Stroker.
  3. Rinse the sleeve with warm water and Kiiroo pure™ intimate toy cleaner or a specialized toy cleaner and allow it to air dry.
  4. Rinse the outer casing or wipe down with antibacterial wipes.
  5. Dry completely before placing the sleeve back in the casing.
  6. After your sleeve has air dried, use the FeelNew Renewing Powder over your sleeve so that it remains smooth and soft.

Cleaning Keon

Keon is not waterproof. Please use a moist or damp cloth after each use.

Disclaimer & Warnings

  • Do not use the Keon if there are exposed electronic elements.
  • Do not use the Keon if you are in a shower, bath-tub, swimming pool, sauna steam room etc.
  • Do not use the Keon if it is excessively hot to touch.
  • Do not use the Keon or Feel Stroker on inflamed or irritated areas.
  • Avoid leaving your Keon in direct sunlight and never expose it to extreme heat.
  • Never use cleansers containing alcohol, petrol or acetone.
  • Do not use heating appliances to dry the sleeve or device.
  • Avoid using harsh soaps as they can damage the sleeve material.
  • Always store the device out of reach of children.